Ace Instruments

Ace Instruments

Ace Instruments

Kukatpally, Hyderabad, Telangana

Temperature Transmitters

2 Wire Loop Temperature Transmitters are industry standard devices used with RTD Pt- 100 Sensors & all thermocouples for signal transfer over long distance using a pair of normal copper wires without EMI/RFI Interference over distance.

Smart Temperature Transmitter

REQUEST CALLBACK
  • Smart Temperature Transmitter
  • Smart Temperature Transmitter

Get Best Quote

Approx. Rs 20,790 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Output Value4-20 m A(HART)
Input ValueUniversal

Smart Temperature Transmitters are Field Mounted Temperature Transmitter. Smart Temperature Transmitters are universal input temperature transmitter.

Smart Temperature Transmitters are designed for setting, in order to meet the specific application requirement of measuring low level signals from thermocouples (THC), resistance thermometer (RTD), resistance (ohm) or EMF (mV) sources. It offers a standard communication capacity using the proven HART protocol.

Specifications:

ModelTTF200
ManufacturerABB
DisplayDisplay without keypad
Measured Deviation0.1 K
Electrical CertificationGeneral Purpose
ConfigurationStandard with temperature units deg.C
InputUniversal selectable between Resistance Thermometer ( 2, 3 or 4 Wire Circuit), Thermocouples, Resistance Remote Signalling Unit , Voltage, mV Voltages
Output4-20 m A(HART)
MountingCarbon Steel
Power Supply10.5 to 42 VDC
Instrument HousingAluminium Alloy 1/2" NPT
Data SheetRefer ABB Data Sheet DS/TTF200 Basic - EN Rev.B
Warranty12 Months Manufacturer Warranty

Additional Information:

Item Code: ABBTTF200

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested

Optex Non Contact Infrared Temperature Transmitter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 14,550 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSA-80T-2A

Infrared Non Contact Temperature Transmitters from Optex , Japan detects and converts the amount of infrared energy into a temperature value. Because the method is non-contact, it enables quick and easy measurement of the target temperature from a safe distance. It converts the temperature measured to an analog 4-20mA output Signal.

Salient Features:

· High-speed response time 100ms/90%

· High heat resistance upto70°C of ambient temperature

· High noise resistance and accurate temperature measurement with stable operation due to SUS body and silicon lens

· Cylindrical shape enabling installation in a limited space

· Temperature measurement range:0-400°C (SA-80T-4A)

· Area:size = 80mm/500mm

Specifications: 

Manufacturer

Optex, Japan

Measuring Range

Model: SA-80T2A - 0 to 200°C Model: SA-80T4A - 0 to 400°C

Accuracy

0 to 200°C: ± 2°C; 201 to 400°C: ± 1%

Repeatability

± 1°C of reading value.

Ambient operating range

0-70°C

Storage Conditions

20 to70°C

Vibration Resistance

10-55Hz, Amplitude 1.5mm, Two hours each in the direction of X, Y, Z

Response Speed

100ms/90%

Environmental Humidity

35-85 % RH (Without dew condensation)

Spectral Response

Thermopile/8~14µm

Analog Output

4-20 mA

Optics

Silicon lens

Area Size

80/500 mm.

Emissivity

ratio Adjustment: 0.95

Power Supply

DC 12-24 V+10%/ Max 70 mA

Waterproof Grade

IP67

Weight

180g

Calibration

Will be provided at no extra charges. Valid for 1 year.

Warranty

12 months manufacturer warranty

 


Additional Information:

Item Code: SA-80T-2A

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested

View PDF

DIN Rail Temperature Transmitter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1,250 / PieceGet Latest Price

ACE Instruments make 2 Wire Loop Temperature Transmitters to be fitted in Panel/ DIN Rail are industry standard devices used with RTD Pt-100 Sensors. All Thermocouples for signal transfer over long distance using a pair of normal copper wires without EMI/RFI Interference over distance.
Temperature Transmitter used in instrumentation where in RTD Pt-100 Sensor Inputs need to be converted to Current/Voltage Output Signal to feed to PLC, HMI, SCADA etc.

Specifications:

Manufacturer

ACE Instruments

Input

RTD Pt-100, Thermocouples (J, K) Select from drop down menu

Output

4-20 mA 2 Wire Loop Powered Calibrated as per input range

Temperature Measuring Range

Select from drop-down menu above

Enclosure

ABS Plastic Din rail mounting type

Calibration

Calibration Certificate: Will be provided at no extra charges. Valid for 1 year

Warranty

12 months’ manufacturer warranty

 


Additional Information:

Minimum Order Quantity: 1 Piece

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested

Save time! Get the Best Deal

*Your information is safe with us.

E E Dew Point Transmitter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 72,900 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandElektronic
ModelEE355

E+E Dew Point Transmitter with a measuring range down to -60 °C Td is ideal for applications in compressed air systems, plastic dryers and industrial drying processes. An integrated auto-calibration procedure permits a measurement accuracy of <2 °C Td.

Dew Point Transmitter measured values, frost point or ppm volume concentration are available on an analog 4-20 mA and a digital Modbus RTU output. Integration into the measurement task is simplified by the compact design and the exceptionally robust stainless steel housing. With an optional Modbus to USB converter and the free EEPCS configuration software, the user can adjust the transmitter, set the Modbus parameters and change the scaling of the
analog output.

Key features:

· Measurement range -60...60 °C Td (-76...140 °F Td)

· E+E autocalibration Measurement accuracy ±2 °C (±3.6 °F)

· Modbus RTU and 4-20 mA output

· Sturdy and compact stainless steel housing

Specifications:

Current consumption

<20 mA + load current /with autocalibration: 100 mA + load current

Electromagnetic compatibility according to

EN61326-1 EN61326-2-3 Industrial environment FCC Part 15 ICES-003 ClassB

Pressure range

0...80 bar

Sensor protection

stainless steel sintered filter

Manufacturer

Electronics

Analog output

4 - 20 mA (3-wire technology) RL < 500 Ohm

Measuring Range

-60...60 °C Td (-76...140 °F Td)

Accuracy

≤ ±2°C Td

Supply voltage

18...28 V DC

Response Time

< 5 min -20 °C Td ( -4 °F Td) → -60 °C Td ( -76 °F Td),15 sec -60 °C Td ( -76 °F Td) → -20 °C Td ( -4 °F Td)

Protection class

Stainless steel 1.4404 (AISI 316L) / IP65

 


Additional Information:

Item Code: EE355

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested

View PDF

KIMO Temperature And Air Velocity Transmitter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 25,000 / PieceGet Latest Price

KIMO Temperature and Air Velocity Transmitter models have an alternating display of air velocity and temperature and a measuring range from 0 to 30 m/s and from 0 to 50 Deg. C

Features:

1) Temperature and air velocity transmitter type CTV100.

2) Ranges from 0-5 m/s to 0-30 m/s and 0 to +50°C, -20 to +80°C, -50 to +50°C, 0 to +100°C (see "Configuration")

3) 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires)

4) ABS IP 65 housing, with or without display

5) Alternating display of air velocity and temperature

6) Quick and easy mounting “1/4 turn” system with wall-mount plate.

Specifications:

Electromagnetic compatibility according to

EN61326

Manufacturer

KIMO

Measuring Range

Temp: 0 to +50°C, -20 to +80°C,-50 to +50°C,0 to +100°C Air velocity: 0 to 5m/s,0 to 10m/s, 0 to 15m/s, 0 to 20m/s, 0 to 30m/s

Accuracy

±0.3% of reading ±0.25 °C

Resolution

Temp:0.1 °C,Air Velocity:From 0 to 3 m/s : 0.01 m/s,From 3 to 30 m/s : 0.1 m/s

Output

Maximum load : 500 Ohms (4-20 mA),Minimum load : 1 K Ohms (0-10 V)

Operating Conditions

Temp:From 0 to +50 °C

Storage Conditions

Temp:From -10 to +70 °C

Response Time

1/e (63%) 5 s

Type of fluid

Air and neutral gases

Power Supply

active sensor 0-10 V or 4-20 mA (alim. 24 Vac/Vdc ± 10%), 3-4 wires

Power Consumption

40 mA (0-10 V) or max. 80 mA (4-20 mA)

Environment

Air and neutral gases

Enclosure

ABS V0 as per UL94

Engineering Units

Temp : °C, °F Air Velocity:

 


Additional Information:

Item Code: CTV_100

Minimum Order Quantity: 1 Piece

Pay Mode Terms: T/T (Bank Transfer)

Yes! I am Interested

Elektronik Compact Dew Point Temperature Transmitter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1.06 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Output Value0-10V
ApplicationMonitoring of compressed air systems, Refrigerant type dryer, Absorption dryer, Plastics dryer
Input Value10...30V DC

Elektronik Compact Dew Point Temperature Transmitter in compressed air systems, dryers for plastic and other industrial processes is becoming increasingly more important.

EE371 series with a measuring range -80...60°C Td (-112...140°F Td)

EE372 series with a measuring range -40...60°C Td (-40...140°F Td) are the ideal solution for such applications.

Elektronik Compact Dew Point Temperature Transmitter is the monolithic measurement cell type HMC01, developed by E+E Elektronik in thin-film technology.

Dew point temperatures in the range of -60...-20°C (-76...-4°F) at room temperature correspond to relative humidity values of 0.08...5.37% RH. The measurement of these low humidity values is not possible with conventional capacitive measurement methods

Features:

· Measuring range -80...60°C Td (-112...140°F Td)

· Accuracy of measurement ±2°C Td (±3.6°F Td)

· Two Td/Tf alarm outputs

· Autocalibration

· Pressure tight up to 100 bar (1450psi)

Typical Applications:

· Monitoring of compressed air systems

· Refrigerant type dryer

· Absorption dryer

· Plastics dryer

Specifications:

Sensor protection

stainless steel sintered filter

Current consumption

voltage output: typ. 40mA / during autocalibration: 100mA, current output: typ. 80mA / during autocalibration: 140mA

Electromagnetic compatibility according to

EN 61326-1 For Industrial Environment EN61326-2-3 I For Industrial Environment CES-003 ClassB FCC Part15 ClassB

Pressure range

0...20bar (0...290psi) / 0...100bar (0...1450psi)

Working temperature range

probe: -40...70°C (-40...158°F); electronic: -40...60°C (-40...140°F);with LC display: -20...50°C (-4...122°F)

Manufacturer

E + E

Measuring Range

EE371: -80...60°C Td (-112...140°F Td), EE372:-40...60°C Td (-40...140°F Td)

Accuracy

5ppm + 9% of reading

Supply voltage

10...30V DC

Output

EE37x-Tx two freely selectable and scaleable analogue outputs for Td, Tf, Wv:0 - 1V / 0 - 5V / 0 - 10V,EE37x-Sx Alarm output:2 potential-free relays (NC)30V DC 0.6A / 35V AC 0.3A (resistive)

Protection class

Al Si 9 Cu 3 / IP65

 


Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Packaging Details: EE371/EE372 series

Yes! I am Interested

View PDF
Save time! Get the Best Deal

*Your information is safe with us.

Non Contact IR Pyrometer

REQUEST CALLBACK

Get Best Quote

Approx. Rs 78,900 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Temperature Range-40 to 1000 Deg C

Non Contact IR Pyrometerare from Dias specifically designed for industrial purpose. The devices are suitable for temperature measurement from –40 °C to 1000 °C on many different nonmetallic or coated metallic surfaces.

The solid body allows usage even under rough environmental conditions. The bright temperature display is visible even over long distance. The very small sensor head allows even the acquisition of measuring object which are difficult of access.

The temperature linear standard output signal of 0/4 to 20 mA allows easy implementation in existing measuring and controlling systems.The device is equipped with a galvanically isolated RS-485 interface, which allows parameterising and software evaluation even in bus systems.All parameters are adjustable via push-buttons and display directly on the device. Also by using the comfortable parameterising and evaluation software PYROSOFT Spot the parameters can be easily adjusted to the application.

Typical application areas:
• Paper and packaging industry
• Kiln engineering
• Glass and ceramics industry
• Food industry
• Chemical industry

Specifications:

 

ManufacturerDIAS
Measuring RangeTemp:–40 °C to 1000 °C
Response Time100 ms, adjustable up to 100 s
Power Supply24 V DC ± 25 %, residual ripple 500 mV
Power Consumptionapprox. 2 W
Data Storage Capacityminimum and maximum value storage
Output0/4 to 20 mA, switchable, temperature linear, max. burden 700 Ω
Dimensionsapprox. 110 mm × 80 mm × 40 mm (electronics box)

Additional Information:

Pay Mode Terms: L/C (Letter of Credit)

Yes! I am Interested

Temperature Transmitters

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Temperature Transmitters are 2 Wire Loop Transmitters and are industry standard devices used with RTD Pt -100 Sensors & all thermocouples for signal transfer over long distance using a pair of normal copper wires without EMI/RFI Interference over distance. These are available in head mounted, panel mounted & IP 65 Wall Mounted enclosures. The Temperature Transmitters in the Head Mounted Type Fitment give an output of 4-20mA & the DIN Rail Mounted Temperature Transmitters give an output of either 4-20mA or 0-10 V.D.C. Analog. Signal convertors for converting the 4-20mA Output to 0-10 V.D.C. Output are also available. The range is factory set as per customer specifications. Temperature Transmitters are also available in IP65 Wall Mounting Enclosures in ABS Plastic. Temperature Transmitter models are available with inputs of RTD Pt-100, J, K, R, S & T Type Thermocouples.

Additional Information:

Item Code: AI-TTx

Yes! I am Interested

Dwyer CDTV CO2 / VOC Gas Detector (0-2000ppm)

REQUEST CALLBACK

Get Best Quote

Approx. Rs 18,900 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Output value4 to 20 ma / 0 to (5 or 10) vdc
ApplicationOdor control, hvac applications in hospitals, schools, and commercial buildings

THE SERIES CDTV CARBON DIOXIDE / VOLATILE ORGANIC COMPOUND (VOC) TRANSMITTER reduces energy cost in buildings by lowering the amount of conditioned air based on the occupancy of the space. By sensing both CO2 and VOC, the transmitter can detect fumes that may need to be exhausted during lower occupancy periods.

FEATURES/BENEFITS

• Combination VOC and CO2 outputs reduce labor and material costs

• Single beam dual wavelength NDIR CO2 sensor allows for use in spaces that may be occupied 24 hours a day

• VOC output is correlated to be equivalent to CO2 measurements

• Ventilate using ASHRE’s occupancy-based VRP Algorithm

APPLICATIONS:

• HVAC applications in hospitals, schools, and commercial buildings • Demand control ventilation • Odor control

• Waiting rooms or other spaces that may be occupied 24 hours a day

SPECIFICATIONS Range:

CO2: 0 to 2000 or 0 to 5000 ppm (depending on model); VOC: 0 to 2000 ppm CO2 equivalent.

Accuracy: CO2: ±40 ppm + 3% of reading.

Temperature Dependence: ±8 ppm / °C at 1100 ppm. Non-Linearity: CO2: 16 ppm.

Pressure Dependence: CO2: 0.13% of reading per mm of Hg. Response Time: CO2: 2 minutes for 99% step change; VOC: 5 minutes.

Temperature Limits: 32 to 122°F (0 to 50°C).

Power Requirements: 16 to 35 VDC / 19 to 28 VAC.

Power Consumption: Average: 2 watts; Peak: 3.75 watts.

 

Sensor: CO2: Single-beam, dual-wavelength NDIR; VOC: MEMS (metal oxide semiconductor). Output: Current: 0 to 20 mA, 4 to 20 mA, 0 to 10 mA, or 2 to 10 mA (depending on selection jumper, max 500 Ω); Voltage: 0 to 10 VDC, 2 to 10 VDC, 0 to 5 VDC, or 1 to 5 VDC (depending on selection jumper, min 500 Ω); Relay: SPST NO 2A @ 30 VDC. Weight: 5.6 oz (158.8 g). Agency Approvals: CE.


Yes! I am Interested

View PDF
Save time! Get the Best Deal

*Your information is safe with us.

Dwyer Carbon Dioxide Temperature Transmitter

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

Minimum Order Quantity1 Piece
UsageIndustrial
BrandDwyer

The SERIES CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied and unoccupied buildings against light source aging effects. The single beam dual wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve a higher level of accuracy, the Series CDT includes digital barometric pressure adjustment and the ability to field-calibrate the sensor. For applications that require visual indication, the wall mount configurations of the Series CDT can be ordered with an integral LCD display. Push buttons are standard on all configurations of the transmitters for access to the menu structure, but wall mount configurations can be ordered without the buttons. To prevent tampering, the action of the buttons can be locked out using an internal dip switch selection

 

SPECIFICATIONS

  • Sensor Single beam, dual wavelength NDIR. Range CO2: 0 to 2000 or 0 to 5000 ppm (depending on model); Temperature: 32 to 122°F (0 to 50°C).
  • Accuracy CO2: ±40 ppm ±3% of reading; RH: ±2% (10 to 90% RH);Temperature: ±1°C @ 25°C.
  • Temperature Dependence ±8 ppm/°C at 1100 ppm.
  • Non-Linearity 16 ppm. Pressure Dependence 0.13% of reading per mm of Hg. Response Time 2 min for 99% step change.
  • Duct Air Velocity Range 0-4000 FPM (20.32 m/s).
  • Temperature Limits 32 to 122°F (0 to 50°C).
  • Humidity Limits 10 to 95% RH (non-condensing).
  • Power Requirements 16 to 35 VDC or 19 to 28 VAC.
  • Power Consumption Average: 2 w; Peak: 3.75 w.
  • Output Current: 4 to 20 mA (max. 500 Ω); Voltage: 0 to 5 VDC or 0 to 10 VDC (min. 500 Ω); Relay: SPST NO rated 2 A @ 30 VDC. Weight 4.4 oz (125 g). Enclosure Rating Duct mount: NEMA 4X (IP66) for housing only; Wall mount: IP20. Agency Approvals CE.

Yes! I am Interested

View PDF
X