- Home
- ยป
- Our Products
- »
- Fire & Safety
Fire & Safety
Siemens RDF600T Thermostat
Product Brochure
| Usage/Application | Heaters |
| Brand | Siemens |
| Temperature Range | 0 to 49 Deg.C |
| Model Name/Number | RDF600T |
| Color | White |
| Housing | IP 30 to EN 60529 |
- Output for 1-speed or 3-speed fan
- 2 or 3-position control outputs
- Two multifunctional inputs for keycard contact, external room / return air temperature (QAH11.1, QAA32), heat / cool changeover, operation mode changeover, window contact on/off, dewpoint monitor, electrical heater enabled, fault contact
- Operating modes: Comfort, Energy Saving and Protection
- Automatic or manual heating/cooling changeover
- Adjustable commissioning and control parameters
- Minimum and maximum setpoint limitation
- With infrared receiver for remote control, remote control not included.
- Color of housing: signal white (RAL 9003)
- 8 Timers with a 7-day programmable schedule
- Backlit display
- 2-pipe system
- 2-pipe system with electrical heater
- 4-pipe system
- This product is regularly exported to USA, Poland, Italy, Dubai, UAE, Oman, Qatar, Saudi Arabia, Nigeria, Kenya, Egypt, Australia, UK, France, Italy, Bangladesh, Thailand, Malaysia, Qatar, Singapore, Romania, Belgium, Russia, Brazil, Germany, Vietnam, etc.
Siemens STA63 Electrothermal Actuator
Minimum Order Quantity: 5 Piece
Product Brochure
| Actuators Type | Electric Actuators |
| Power | 2.5W |
| Type | Single Phase Electric Motor |
| Phase | single phase electric motor |
| Material | Plastic |
| Average Power Consumption | 2.5 W 6 VA |
| Frequency | AC 24 V +- 20 % 50 / 60 Hz |
| Ambient Temperature | 20 DegreeC. |
| Current Rating Amp | 250 mA |
Siemens STA63 Electrothermal Actuator stem retracts and the radiator valve is opened by the spring. The
position of the stem is proportional to the DC 0…10 V positioning signal. This Electrothermal actuator stem when de-energize the radiator valve is close. The actuator deploys to the 50% stroke position if the positioning signal is lost when applying operating voltage DC 0…10 V actuators support various operation modes, see also under DIP Switch settings.
Features of Siemens STA63 Electrothermal Actuator :
- These Siemens Pneumatic Actuators Connect cable up to 15 m, halogen-free up to 10 m
- This Siemens STA63 has Connecting cable with LED operation indicator
- Connecting cable with DC 0…10 V module or auxiliary switch.
Additional Information:
- Production Capacity: 201 Grams
- Delivery Time: 2-3 weeks
Siemens SKD62 Electrohydraulic Actuator
Minimum Order Quantity: 5 Piece
Product Brochure
| Actuator Type | electro hydraulic actuator |
| Actuators Type | Hydraulic Actuators |
| Stroke Length | 2 |
| Structure | Control |
| Model Name/Number | Siemens SKD62 hydraulic actuautor |
| Usage/Application | Aerospace and defense, Oil and gas industry, Power Generation, Manufacturing, Construction. |
Siemens SKD62 Electrohydraulic Actuator is an actuator that converts an input signal into a physical action, such as linear or rotational movement. An electrohydraulic actuator uses hydraulic fluid and an electric motor to generate motion. The SKD62 electrohydraulic actuator is a specific model made by the company Rotork. It is designed for use in industrial settings, such as oil and gas, power generation, and water treatment plants. The actuator is used to control valves and other mechanical components that require precise and reliable movement.
Features of Siemens SKD62 Electrohydraulic Actuator:
- Precise control: The SKD62 actuator uses advanced control electronics that enable it to provide precise control over valve and other mechanical components.
- High reliability: The actuator is designed to operate reliably in harsh industrial environments and can withstand extreme temperatures.
- Compact design: The SKD62 actuator has a compact design, which makes it easy to install and fit into tight spaces.
- Customizable: The actuator can be customized to meet specific application requirements, such as different voltage or control options.
- Flexible mounting: The actuator can be mounted in various orientations, allowing it to fit in a wide range of applications
Additional Information:
- Production Capacity: 3.60 kg
- Delivery Time: 2-3 weeks
Drager 8000 Powered Air Purifying Respirator(PAPR)
Minimum Order Quantity: 1 Set
Product Brochure
| Type | Air Purifying Respirator |
| Brand | Drager |
| Color | Black and White |
| Weight | Drager X-plore 8500 incl. standard battery and splash guard lid: approx. 1,400 g |
| Model | X-Plore 8000 |
| Ingress protection | IP65 (dust-tight and resistant to water jets from all sides) |
| Belt extension | 350 mm (standard and decontamination version) |
| Airflow | Half and full-face mask: 115, 130 or 145 l/min Hoods, Helmets and Visors: 170, 190 or 210 l/min |
| Charging Time | Approx. 4 hours (in two hours 80% can be reached) |
Drager 8000 Powered Air Purifying Respirator offers a new level of intuitive handling combined with intelligent electronics that provide the high degree of safety that people need to focus on the task at hand.
Demron IED/RDD/RAD Shield Ballistic And Non Ballistic (Can Be Customised)
Product Brochure
| X-ray | 100 kv |
| Gamma (Y) | 1.173 MeV 1.332 MeV |
| Beta ( B ) | 546 KeV (Sr) 2.27 MeV ( Y |
| Sizes | 36" x 30" Can be Customised |
| Colours | Black and Red |
| Type | Ballistic and Non Ballistic |
| Models | Shieds,Blankets |
| No of Layers/Ply | Standard 2 can be customised |
Unsurpassed Fragmentation Protection (V50 rating of >5426 ft/s for 2gr, 5234 ft/s for 4gr, >4866 ft/s for 16gr, 3952 ft/s for 17gr, 2721 ft/s for 64gr, and 1979 ft/s 9mm)Standard Sizes (Custom Sizes Available) 36 x 30 Level IIIA ballistic protection STD 0101.04
Reduces RF transmission
Shield can be used as a suppression blanket for IEDs, RDDs, and RADs
1000 denter Cordura outer covering, high-strength abrasion, ame and acid resistant outershell
Easily deployed in ???eld, handles for ease of use
PAPR With HEPA Filters For Pharma, Doctors, Hospitals
Product Brochure
| Brand | CleanAIR |
| Model Name/Number | CleanAIR Chemical 2f |
| Color | Blue |
| Weight | 1.2 kg Approx. |
| Type | PPE |
| Size | 240 X 110 X 120 mm |
| Grade Standard | Ingress protection IP64/IP65/IP68 |
| Air Flow | adjustable 120 -235 lpm |
| Air Source Acceptable | Ambient |
| Battery Type | Li-Ion 14,4 V / 2,6 Ah (standard battery) |
| Certification | EN 12941 TH3 & EN 12942 TM3 |
Venus Reusable Respirator Kit
Despite its compact design and low weight, Chemical 2F is characterized by outstanding durability, chemical resistance, and increased ingress protection. The thought-out design with a smooth surface allows easy decontamination by shower or even full immersion. The unique automatic closing system prevents unwanted contamination while the filters are being changed. The smart Flow Control system maintains the airflow on the constant level regardless filter clogging or low battery charge. Audio-visual alarm indicates when the battery charge and/or filter replacement is required. Adjustable airflow from 120 up to 235 lpm is available during the whole shift no matter of the type of the filter thanks to optional Heavy-Duty battery.
Features & Benefits
- Compact design and low weight
- Compatible with a hood, mask, or ventilated protective suit
- High mechanical and chemical resistance
- Increased ingress protection allows decontamination by shower or even full immersion (IP64/IP65/IP68)
- Full colours display clearly shows all the relevant information – filter clogging, battery charge, airflow
- Flow Control system maintains constant airflow regardless of the level of filter clogging or battery charge
- Operation time up to 16 hours with Heavy Duty battery, or up to 10 hours with standard battery
- Short battery recharging time < 3 hours (standard battery)
- Audio-visual alarm
- Multilingual user interface
- Back harness available for increased comfort
Additional Information:
- Delivery Time: Ex Stock. However, subject to prior sales.
- Packaging Details: Standard Accessories: Purifying Blower + Standard hose (for Hoods) + Standard Soft Hood + Filter + Standard Battery + Charger